Leak detection and prevention

A suite of products that start with a LeakSafe WRAS approved motorised ball valve and Valve Control on the incoming water mains, and a wireless On/Off switch by the main entry/exit point to turn the water off each time you leave the property.

Turning off the water is as easy as turning off a light.

Add another layer of protection by installing leak detection tape in areas where leaks are most likely – under kitchen/laundry appliances, baths and showers and around water storage tanks. The tape will detect even a small drip from a pipe or connection and send a wireless signal to the Valve Control to close the valve on the incoming mains and alert the occupier.

Optional modules:

• Connect to a building management system or burglar alarm system
• Install a flow sensor to detect water flow and shut the valve if the property is empty or continuous flow is detected signalling a leak
• Extended range wireless technology for larger properties.

Remote risk monitoring provides localised leak detection with immediate notification if a leak is detected, by SMS and/or email to owners, occupiers or property managers, and a client dashboard with an auditable record of detected leaks and equipment status.